1. Product Features

AD3-1 calcium-free slagging agent does not contain calcium element and is specifically designed for aluminum alloy melts that are sensitive to calcium. It can effectively separate dross, with a loose slag layer, high metal recovery rate, and no introduction of calcium impurities.

II. Applicable Scenarios

It is suitable for slagging treatment of aluminum alloys with strict limitations on calcium content, such as certain conductive aluminum and high-end cast aluminum alloys.

III. Dosage

0.1% to 0.2% of the mass of the aluminum liquid, with a typical value of 0.15%.

IV. Usage

The temperature of the aluminum liquid is 680℃～750℃, which is evenly spread on the slag surface. Gently stir for 1～2 minutes, and remove the slag after it dries. This process can be repeated.

V. Precautions

Avoid mixing with calcium-containing materials; take protective measures during operation.

VI. Packaging Specifications

2 kg/bag, 20 kg/box

VII. Storage conditions

Store in a ventilated and dry place, and strictly prevent moisture.

VIII. Shelf life

12 months

IX. Production unit

Suzhou Futuo New Material Technology Co., Ltd

This instruction serves as a general usage guide. Specific process parameters should be adjusted based on the actual on-site conditions. The final interpretation of this document belongs to Suzhou Futuo New Material Technology Co., Ltd.